Archives: Hightlights

For quick installation Jetting (Blowing)-, pull- or push-installation in FTTH applications.
Background: The use of pre-terminated cables generally saves time and cost. For easy and fast connection between the BEP and the ONT we propose a full pre-terminated assembly unit incl. the ONT panel. The assemble can be blown-in pulled or pushed from one side in one piece within minutes. Available in the appropriate length, up to 140m.The special connector housing to simply click on after the installation.
Benefit: Time & Cost Saving, no splicing and comprehensive testing is required after the installation

The connectors LC-Pull&Go® and SC-Pull&Go® connectors are the core elements of the innovative FTTH pre-term-solution. Their detachable housing makes it possible to pre-terminate the fibre optic cable and mount the housing after pulling, pushing of blow-in the cable assembly.

The cable Assembly-Set consists of the following components

• Novobit ONT Module pre-connected
• FTTH BrightCore® Ø2.5mm cable, with e.g. G.657.A1 fibres. Variants with 2 or 4 fibres
  available.
• End-A: LC-Pull&Go® or SC-Pull&Go® with protected ferules ready to blow-in or push/pull
  through the micro-duct. / connectors are possible.
• Option: Both Ends pre-terminated

• Ø10/6mm recommended for 4 fibres / connectors
• Ø7/4mm recommended for 2 fibres / connectors

Qualification & Performance of the LC-Pull&Go® pre-terminated cable assembly

The performance of Novobit’s solution has been validated by a recognised certification lab in Germany and features the following performance data:

• Injection length with air pressure: >144m
• Injection length without air pressure:>30m
• Injection speed 4 fibres/connectors:80m/min
• Injection speed 2 fibres/connectors:120m/min

In all test series the cable could completely be reeled of. The difficulty of the test duct section was medium-high and the cable could be blown out in one piece without any problems. The cable printing was still clearly legible afterwards.

TheELiMENT™ MDC connector ofUS Conec is a Very Small Form Factor (VSFF) duplex optical connector designed for termination of Multi-mode and Single-mode fiber cables up to 2.0mm in diameter. The MDC connector is manufactured with proven 1.25mm ferrule technology used in industry-standard LC optical connectors, meeting 61753-1 Grade B insertion loss requirements.

• Two 1.25mm ferrules in one connector housing
• Push-pull boot for connector insertion and extraction
• Simple polarity reversal with no exposed fibers
• Meets IEC 61753-1 Grade B insertion loss requirements
• Telcordia GR-326 and TIA-568 compliant
• Designed for cables up to 2.0mm OD
• MM, SM and SM APC available
• 3x fiber cabling density over LC

MDC Adapters

MDC 2-, 3-, 4- & 6 Port Adapter (duplex) variants.
Special: 2-port and 3-port adapters designed to fit through the same panel cutout defined for duplex LCadapters, allowing an instant 2x or 3x of the current module/panel connector density by simply removing the LCduplex adapters and installing the MDC adapters.

Novobit Assembly Products Benefits Novobit is an ISO9001 and ISO14001 certified manufacturer, with 100% incoming inspection, quality check during production and 100% testing of the final products assuring excellent performance. Novobit LC products are OFS licensed, ensuring a perfect fit and maintained warranty of the active devices.

Novobit’s 30-degree 12 steps connector tuning patent improves the quality even further. Novobit can provide grade “A” pre-assembled SC, LC and LSH (E2000) products.

Novobit 30-degree step tuning
The ferrule can be positioned into 12 different positions offering 30° step tuning. This unique patented process and product enables Novobit to supply grade A connectors.

Fan-out Assemblies

Pre-terminated fan-outs simplify installations in field. Novobit can provide and assemble any type of configuration on the connector side, eliminating the need for splicing.
Fan-out assemblies are available with all of the connectors in Novobit’s portfolio, as well as with Senko, SeikohGiken, US Conec or R&M’s connectors.
Novobit can provide a selection of dividers depending on the form factor and the amount of fibers (up to 48 fibers), with 600µm or 900µm tube, ensuring full protection of the fan-out in combination with our pulling aids and packaging systems.